At this stage, the fleet should have been thoroughly tested following the Fleet Management instructions, as well as setup following the Setup instructions.
Checklist Management
The checklist, located on the bundle action panel, is a feature that can show potential problems to the operator at a glance.
During this phase, the task of the operator is to solve these problems if they appear until the show is finally started.
This checklist is divided in multiple items, which are configurable in the Bundle DCC Configuration.
Some of these items are blocking and will appear in red as they can't be ignored for a flight.
On the contrary, some items will appear in orange as a warning. Fixing them isn't required to perform a flight, but is highly recommended.
You can click on any conflicting item to select the drones that have a problem.
System checks
Common to all bundles
| Name | Activates when... | Type | Action |
|---|
| Iso-Firmware | the fleet firmware versions aren't uniform | Error | Select the drones and update their firmware to match the fleet's |
| Count | the number of bound drones isn't the same as the number of drones present in the bundle | Warning | If this isn't normal, check that all the drones are switched on. |
| Name | some drones role and name is incoherent | Error | The system will automatically fix these |
| Timecode connected | a timecode unit isn't detected | Error | Check the timecode unit usb connection with the DCC |
| Trigger | one trigger isn't detected. Mostly used in combination with the Dronisos Hook | Error | Check that the expected trigger is present on the same network as the DCC |
Specific to UWB bundles
| Name | Activates when... | Type | Enabled by default | Default value / Threshold | Action |
|---|
| UWB Anchors | the number of detected UWB antennas is under the specified threshold | Error | No | N/A | Check the status of the antennas on the CUWB Manager |
Drones checks
Common to all bundles
| Name | Activates when... | Type | Action |
|---|
| Battery | some drones batteries are too low | Warning | Select the drones and replace their batteries |
| Clock | the latency between some drones and the system is over the specified threshold | Warning | Wait for this item to resolve itself. If it doesn't, select the drones and reset them. If the problem is still present, replace the drones. |
| Status | some drones report a non-OK status | Warning | Please refer to Alarms & States |
| Files | some files present on some drones aren't coherent with their role | Error | Send the required files to the drones. Please refer to FILE UPLOAD for more information |
| Waiting for Start | some drones aren't ready to receive a start | Warning | Wait for this item to resolve itself. If it doesn't, select the drones and reset them. If the problem is still present, replace the drones. |
| Overridden LEDs colors | a manual LED order is currently overriding some drones LEDs color | Warning | Send a transparent LED order to the drones |
Specific to GPS bundles
| Name | Activates when... | Type | Action |
|---|
| RTK | some drones report a non-RTK Float status | Warning | Please refer to TODO FIX GPS Problems |
| Fireworks | some drones report a firework state that isn't normal | Error | Please refer to Pyrotechnics |
| Start Orientation | some drones starting orientation is too far away from what is expected | Error | Check that the drones orientation on the start zone is coherent with the one in the bundle. If it is, calibrate the drones. If not, double check your start zone layout |
Specific to UWB bundles
| Name | Activates when... | Type | Action |
|---|
| Tag Serial | multiple drones report the same tag serial | Warning | Select the drones and check the serial written on their tag. One of them should report a different serial that the one physically written on the tag |
| Redundancy | some drones that should have a redundant communication do not | Warning | Select the drones and hard-reboot them. If this doesn't solve the issue, replace them. |
TODO Override